No items found.
No items found.
Home
Products
IP/ PoE Transmission
IP/PoE over Coaxial Extension
IP01

Passive IP over Coaxial Extender

  • Network bandwidth up to 100Mbps.
  • Signal extension up to 300M over RG6U coaxial cable.
  • No power required for TX & RX unit.
Inquiry

IP01 is an Ethernet extender that can use coaxial cable to send IP signal without replacing existing cable, which can smoothly upgrade your CCTV system at lowest cost.

Upgrade CCTV Cameras from Analog to IP without Rewiring

1-IP cameras have advanced functions, such as fisheye and thermal

Effortlessly Turn Analog into IP Cam without Concern about the Wiring Budget

1-IP cameras have advanced functions, such as fisheye and thermal
2-Passive IP over Coaxial Extender, Front, Side, Back Views
IP01

Compared to analog CCTV cameras having relatively slow progress in their technology, IP ones are more promising and much more flexible for surveillance use.

However, you will probably concern about the cost of the upgrade. The old and expensive coaxial cable can not be used anymore. You don't know what to do with unused coaxial cables, other than throwing them away. Then, you might start thinking can I use coaxial cables for my new CCTV system?

The answer is YES! SC&T's IP01 is the product that solves your problem with a small budget and a  great result.

What is IP over Coaxial?

The IP over coaxial is a technology that can use coaxial cable to transfer IP signal, helping you upgrade CCTV camera from analog to IP without replacing existing cables. IP01 uses such technology and acts as an IP to coaxial converter to send a CCTV video from its transmitter to its receiver.

3-The IP over coaxial is a technology that can use coaxial cable to transfer IP signal

Passive

Active

IP

IP01

IP09C

PoE

IP01P

IP09CP

*Warning: IP01 does not support PoE transmission.

Estimate Distance (Max 300M for RG6U Cables)

You can find the suggested transmission length by different cables. Please read thoroughly before use

Coax Cable

Link Speed

Distance ( Max)

RG59

Auto 100Mbps

100M

RG59

10Mbps

200M

RG6U

Auto 100Mbps

150M

RG6U

10Mbps

300M

6-We provide complete extending distance information
  • The testing is performed using CommScope 75Ω RG59/ RG6U coaxial cables.
  • Compliant with IEEE802.3 and IEEE802.3u.

* Ensure the old cable has enough length

Easy Installation

Easily connect the transmitter to the camera and the receiver to an NVR and finish the installation.

* Make sure the cable is in a good condition before installation

7-connect IP01 transmitter to camera and receiver to an NVR

Compact Size

IP01 is 6.4cm in length, easy to be installed in any environment

8-IP01 is 6.4cm in length, have compact size to be install in any environment

Model

HKM02BP-4K

HKM02B-4K

HKM02B

VDKM02B

Video Format

HDMI

HDMI

HDMI

VGA/DVI

Resolution

4K@30Hz

4K@30Hz

1080p@60Hz

1080p@60Hz

Audio Embed & Extract

V

V

V

V

IR

V

V

V

V

RS232

V

V

V

V

PoE

V

Fiber Module

V

V

  • Network bandwidth up to 100Mbps.
  • Signal extension up to 300M over RG6U coaxial cable.
  • No power required for TX & RX unit.
Firmware/Software

Release Date

Ver.

Release Note

File Name

No items found.
Tutorial Video

Show More

Specification

ITEM NO.

IP01

Support

Transmission Distance

300M

Network Bandwidth

10/ 100Mbps

Ports & Interfaces

Input

1 x RJ45

Output

1 x BNC

Show More

More
IP01

Passive IP over Coaxial Extender

Thank you! Your request has been accepted. We look forward to getting in touch with you and hope you won’t find our email in the junk folder!
Oops! Something went wrong while submitting the form.