90W 4 Port Long Reach PoE Extender over CAT5e 800M

IP09PHK is a 90W PoE-switch-like device but can use send the PoE signal over up to 800M and split it into 4 signals for 4 PoE devices. It can perfectly work with PoE cameras to establish an advanced CCTV system used in large scale spaces, such as road intersections, supermarkets, amusement parks, parking garages and so on.

Extends 4 PoE signals over cost-effective CAT5e (or greater) cables.
Signal extension up to 800M over CAT5e (or greater) cable.
Provides up to 90W power for remote PoE device.
Power source from either a PoE switch or an external power adapter.
Bandwidth up to 100Mbps.
Supports Full duplex and half duplex mode and Auto MDI/MDI-X switching.
Built-in 30kV ESD, 40A EFT, and 30A surge at RJ45 side.

Using IP09CPR (PoE Extender) and a PoE Switch

‍

Using IP09PR (PoE Extender) and a Power Adapter

‍

Use IP09 (Ethernet Extender) and Power Adapter at IP09PH

Firmware/Software

Release Date

Ver.

Release Note

File Name

No items found.

Tutorial Video

Show More

Specification

ITEM NO.

IP09PH

IP09PR

Support

Compliance

IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3 N-Way Auto-Negotiation
IEEE 802.3x Full Duplex Operation and Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

Network Bandwidth

10/ 100Mbps

Max. Transmission Distance

10Mbps at 1000M, 100Mbps at 500M

Ports & Interfaces

Input

1 x BNC (75Ω), 1. x RJ45 (Yellow)

1 x RJ45

Output

4 x RJ45 (Black)

1 x RJ45

Power Interface

1 x (5.5 x 2.1mm) DC Jack

Show More

Inquiry

90W 4 Port Long Reach PoE Extender over CAT5e 800M

I agree to the Privacy & Policy & Terms

Thank you! Your request has been accepted. We look forward to getting in touch with you and hope you won’t find our email in the junk folder!

Oops! Something went wrong while submitting the form.

Discontinued

Suggested Replacement Model

IP09PHK