No items found.
No items found.
Home
Products
IP/ PoE Transmission
IP/ PoE Extension
IP09PHK

90W 4 Port Long Reach PoE Extender over CAT5e

  • Extends PoE signal over a cost-effective Ethernet cable.
  • Signal extension up to 800M over CAT5e (or greater) cable.
  • Provides up to 90W power for remote PoE device.
  • Power source from either a PoE switch or an external power adapter.
  • Bandwidth up to 100Mbps.
Inquiry

IP09PHK is a 90W PoE-switch-like device but can send the PoE signal over up to 800M and split it into 4 signals for 4 PoE devices. It can perfectly work with PoE cameras to establish an advanced CCTV system used in large scale spaces, such as road intersections, supermarkets, amusement parks, parking garages and so on.

Do you have multiple PoE signals to extend for your CCTV cameras?

How do you install 4 cameras with a 200M distance between the cameras and the control room?

Here is the way that saves you money and time!

Using one cable to send 4 PoE signals for remote PoE devices

IP09PHK is a 4 port PoE extending switch that can use one cable to send 4 PoE signals (data and power) to far sides, allowing installers to configure PoE cameras in a labor-saving way.

Enable 4 CCTV cameras from 200M away

IP09PHK can provide up to 100Mbps bandwidth and power from distance to enable 4 PoE cameras, saving cable costs, and installation time.

It's OK to extend longer

If you need more distance for your PoE devices, IP09PHK can send the signals for up to 500M while remaining 100Mbps bandwidth that can carry a great amount of data for hi-res videos.

Transmitting over not only Ethernet but coaxial cables

With the extending switch, you can use either Ethernet or existing coaxial cable to transfer the signal, providing more flexibility for your installation.

Other Features

Clear LED Indicators

Built-in multiple LED indicators for installers to instantly identify the current connection status and make the necessary adjustments.

Fixable Design

Built-in mounting holes to allow the device to be fixed on a wall or a platform, avoiding slippery and moving.

Related Items

Offering a full range of surge protectors that can prevent your expensive PoE devices from high-voltage spikes.

  • Extends 4 PoE signals over cost-effective CAT5e (or greater) cables.
  • Signal extension up to 800M over CAT5e (or greater) cable.
  • Provides up to 90W power for remote PoE device.
  • Power source from either a PoE switch or an external power adapter.
  • Bandwidth up to 100Mbps.
  • Supports Full duplex and half duplex mode and Auto MDI/MDI-X switching.
  • Built-in 30kV ESD, 40A EFT, and 30A surge at RJ45 side.
Using IP09CPR (PoE Extender) and a PoE Switch

Using IP09PR (PoE Extender) and a Power Adapter

Use IP09 (Ethernet Extender) and Power Adapter at IP09PH
Firmware/Software

Release Date

Ver.

Release Note

File Name

November 15, 2021

V1.0_2111152

Firmware Upgrade

Release Date

November 15, 2021

Ver.

V1.0_2111152

Firmware Upgrade

July 9, 2021

V1.0_2107091

Firmware Upgrade

Release Date

July 9, 2021

Ver.

V1.0_2107091

Firmware Upgrade
Tutorial Video

Show More

Specification

ITEM NO.

IP09PH

IP09PR

Support

Compliance

IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3 N-Way Auto-Negotiation
IEEE 802.3x Full Duplex Operation and Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

Network Bandwidth

10/ 100Mbps

Max. Transmission Distance

10Mbps at 1000M, 100Mbps at 500M

Ports & Interfaces

Input

1 x BNC (75Ω), 1. x RJ45 (Yellow)

1 x RJ45

Output

4 x RJ45 (Black)

1 x RJ45

Power Interface

1 x (5.5 x 2.1mm) DC Jack

1 x (5.5 x 2.1mm) DC Jack

Show More

More
IP09PHK

90W 4 Port Long Reach PoE Extender over CAT5e

Thank you! Your request has been accepted. We look forward to getting in touch with you and hope you won’t find our email in the junk folder!
Oops! Something went wrong while submitting the form.