QUICK SEARCH
VAB-1232
Bluetooth Digital amplifier kit ( aptx bluetooth receiver) with IR cable/IR remote control/power adpater
Features:
  • 1 x stereo audio input via 2xRCAs in parallel connection with wireless BT-input
  • 1 x stereo audio input via 3.5mm jack
  • 1 x microphone input via 6.3mm jack
  • 1 x loop via 3.5mm jack with unit link up to 3units or external amplifier
  • 1 x 4-P screw connector for speakers out
  • Support IR(Infrared) and RS232 control
Inquiry
Audio General
Frequency Response 25Hz ~ 30kHz 20Hz ~ 22kHz(Bluetooth) under aptX protocol Input Sensitivity 1.5V
Volume Control Range 65dB SNR >90dB(A-weighted)
Bass Control Range 12dB Treble Control Range 12dB
Power Output 2x 30W(RMS) @ 8Ω(Stereo) Stereo Channel
Separation
<55dB
THD <1%  @ 1kHz2W <10% @ 1kHz (max power)    
Audio Input Audio Output
Input 2 Stereo audio 1 MIC Output 1 Amplifier(Speaker) 1 Stereo audio(Loop)
Input Connector RCAx 2 3.5mm jack x 1 6.5mm jack x 1 Output Connector 4-P screw connector x 1 3.5mm jack x 1
Input Impedance >20kΩ(Stereo audio) 600Ω(MIC) Speaker Output
Impedance
8
    Loop Output
Impedance
>20k
Bluetooth Receiver Module
Version 2.1vEDR(3M/bps) Profile Support A2DP profile
Reception Range Up to 30ft (depending on
environmental conditions.)
   
Control Parts
IR Remote RMC-110 IR Receiver IRS-3060 (38kHz)
RS-232
Pin Configurations
2=TX, 3=RX, 5=GND    
General
Power Supply DC 24V, 2.5A Product Weight 397g
Case Dimension 140mm(L) x 105mm(W) x 45mm(H)