Additional files

RS002E RS232 Full Duplex CAT5e Extender

RS232 CAT5 Extender

Passive HD-TVI/AHD/HDCVI Ground Loop Isolator

  • Extends any RS232 compliant devices up to 2000 meters at 115200bps.
  • One CAT5e/5E cable
  • Easy plug and play installation.
  • Full-duplex data communication
  • Speed up to 115,200 bps.
  • Complete transmission of all pin RS-232C signals.

RS002E RS232 CAT5 Extender
The CAT5 RS-232 Extender is a low cost, hardware-based solution providing remote access and control of any RS-232 protocol device. With regular RS-232 devices you are limited to an immediate area of control. The CAT5 RS-232 Extender extends control to over 2000M. This provides you with a tremendous amount of flexibility in your topology. Now you can place RS-232 devices in any location you want and control them remotely. The RS-232 Extender also provides full duplex transmission and is compatible with all RS-232 protocols.

Data Baud Rate 300 bps ~ 115200 bps
Input/Output Interface (RS232) DB9 x 1 (Female) DB9 x 1 (Male)
DB9 Pin Out Pin 1 – Carrier Detect
Pin 2 - Received Data
Pin 3 - Transmit Data
Pin 4 - Data Terminal Ready
Pin 5 - Signal Ground
Pin 6 - Data Set Ready
Pin 7 - Request To Send
Pin 8 - Clear To Send
Pin 9 – Ring Indicator
Link interface RJ45 x 1
Transmission Range (Max.) 2 KM
Power Consumption 200mA ~ 250mA
Power Supply DC 5V 1A
Temperature Operation: 0 ~ 55℃, Storage: -20 ~ 85℃, Humidity: up to 95%
Dimensions W x H x D mm 67 x 74.5 x 27
Weight g 130