Additional files

4K HDMI (HDBaseT) CAT5e Extender with IR/POE 70 meters

HDMI CAT5 Extender with IR/PoH

  • Extends HDMI and IR signal over one CAT5e/5e/6 cable.
  • Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K 60Hz 4:2:0 capable.
  • Bi-directional IR, support 30-60kHz.
  • Max. Data Rate- 10.2Gbps.
  • HDMI 1.4 and HDCP 2.2 compliance.
  • Transmission range up to 70M by CAT5e/6 at 1080p@60Hz@24bit.
  • Audio support up to LPCM7.1, Dolby TrueHD, DTS-HD MA.
  • Support PoH (Power over HDBaseT), no external power required at receiver.
  • External power supply included for the Transmitter.
HDMI CAT5 Extender with IR/PoH
HE02EIP HDMI (HDBaseT) CAT5 Extender is provides full 3D (all formats) & resolutions up to 4Kx2K (4 times the 1080p) with multi-channel audio over a single low cost CAT5e/6 cable. Fully compliant with HDCP, EDID and CEC control. Built-in bi-directional simultaneous IR transmission to allow extend the remote control either source or/display side. With supports PoH (Power over HDBaseT) feature which eliminating excess or unwanted power drain and also provides power to the receiver at the remote location.
Input / Output Interface HDMI Type A x 1
HDMI Video Support Up to 1080p@60Hz@48bits,3D,4K x 2K
HDMI Audio Support LPCM 7.1 192KHz, Dolby Trued, DTS-HD MA
Distance 60M by CAT5e/6, 70M by CAT6
HDBaseT Connector RJ45 x 1
LED Indication Green x 1, Blue x 3
IR Carrier Frequency 30 - 60Khz
IR Angle ± 15° ± 55°
IR Distance 5m / Bi-directional
Power Supply DC 12V 1A X
Power Consumption Max 11.4W, Low Power 1.8W
Temperature Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%
Dimensions   mm 67 × 95 × 27
Weight g 155 165