PRODUCT SELECTION
VAB-1231
Product Introduction
The devices is designed to enhance sound reinforcement through audio input connectors either wired or wireless- Bluetooth®. Additionally, supporting access control over IR extension through the provided IR receiver using the customized remote control is also an additional feature
Audio General |
Frequency Response |
25Hz ~ 30kHz 20Hz ~ 22kHz(Bluetooth) under aptX protocol |
Input Sensitivity |
1.5V |
Volume Control Range |
65dB |
Stereo Channel Separation |
<55dB |
Bass Control Range |
12dB |
Treble Control Range |
12dB |
Power Output |
2x 30W(RMS) @ 8Ω(Stereo) |
THD |
<1% @ 1kHz(2W) <10% @ 1kHz (max power) |
SNR |
>90dB(A-weighted) |
Audio Input |
Input |
2 Stereo audio 1 MIC |
Input Connector |
RCAx 2 3.5mm jack x 1 6.5mm jack x 1 |
Input Impedance |
>20kΩ(Stereo audio) 600Ω(MIC) |
Audio Output |
Output |
1 Amplifier(Speaker) 1 Stereo audio(Loop) |
Output Connector |
4-P screw connector x 1 3.5mm jack x 1 |
Speaker Output Impedance |
8Ω |
Loop Output Impedance |
>20kΩ |
Bluetooth Receiver Module |
Version |
2.1vEDR(3M/bps) |
Reception Range |
Up to 30ft (depending on environmental conditions.) |
Profile Support |
A2DP profile |
Control Parts |
IR Remote |
RMC-110 |
IR Receiver |
IRS-3060 (38kHz) |
RS-232 Pin Configurations |
2=TX, 3=RX, 5=GND |
General |
Power Supply |
DC 24V, 2.5A |
Case Dimension |
140mm(L) x 105mm(W) x 45mm(H) |
Product Weight |
397g |