QUICK SEARCH
7 products in this product line
IR Repeater Distributor (1 x 4) with screw connector for  IR receiver
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • Four emitter output connections,
  • Status power receptacle with LED indicator.
  • Power receptacle with LED indicator.
  • Removable Connector for system connection.
  • For mounting/adhesive near audio equipment.
IR Repeater Distributor (1 x 4) with one screw/one plug connector for IR recceiver
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • Four emitter output connections.
  • Power receptacle with LED indicator.
  • Removable Connector for system connection.
IR Repeater Distributor (1 x 4) with two IR emitter & two IR blaster power
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • The RPT-204-2 repeater can provides 6 IR distribution inputs when paralleled with 3 RPT-204-2 systems.
  • The Emitter output can run 2 IR blasters.
  • The RPT-204-2 is built with an Amplifier circuit for driving IR emitters or high powered IR blasters.
  • The RPT-204-2 control distance can provide up to 400M lengths of wire between IR set to RPT-204-2 system when switching NET ON.
  • The “ST OUT” can provides a status power from 12 volt trigger output or wall type power supply into a display unit.
  • NET Amp circuits can provide better performance for high data rate of IR codes transportation.
IR Receiver Cable with strip end  (30-60Khz)
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • Carrier Frequency: 30K to 60K Hz.
  • 2 meter long Infrared sensor cable- acts as a remote receiver and control unit.
  • Control Range: 38 KHz up to 30 feet indoor and 56 KHz up to 25 feet indoor on axis, depending on remote strength and ambient interference and 15 to 20 feet in direct sunlight.
  • Reception Angle: + / – 45 degree off axis.
  • LED display:Activity LED: When IR received the signal form remote controller the Blue LED indicates IR signal activity a completed circuit with a terminator or an Emitter.
  • IR lens with black frame is designed to reject visible light interference.
  • Room to Room Wire Recommendation: Using 3 - conductor (min.) 24 gauge unshielded solid or stranded copper wire up to 1000 feet (300M) length.
  • Power Requirement: DC 12V, (20mA), Using a regulated adaptor is always recommended.
  • Dimension: 62(L) x 10(W) x 10(H) mm.
IR Receiver Cable with plug connector (30-60Khz)
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • Carrier Frequency: 30K to 60K Hz.
  • 2 meter long Infrared sensor cable- acts as a remote receiver and control unit.
  • Control Range: 38 KHz up to 30 feet indoor and 56 KHz up to 25 feet indoor on axis, depending on remote strength and ambient interference and 15 to 20 feet in direct sunlight.
  • Reception Angle: + / – 45 degree off axis.
  • LED display:Activity LED: When IR received the signal form remote controller the Blue LED indicates IR signal activity a completed circuit with a terminator or an Emitter.
  • IR lens with black frame is designed to reject visible light interference.
  • Room to Room Wire Recommendation: Using 3 - conductor (min.) 24 gauge unshielded solid or stranded copper wire up to 1000 feet (300M) length.
  • Power Requirement: DC 12V, (20mA), Using a regulated adaptor is always recommended.
  • Dimension: 62(L) x 10(W) x 10(H) mm.
IRE-30602C20
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • 1.Plug & Play USB powered IR extender cable
  • Forming the receiver with one blaster same into one USB powered cable for easy plug & play installation.
  • 2.PLASMA/CFL/LCD/LED friendly.
  • 3.Infrared frequency bandwidth: 30 – 60 KHz.
  • 4.IR receiver cable in 200cm long with LED talkback function IR blaster cable in 200cm long, non-blinking version.
  • 5 Control range:
  • 38 KHz up to 30 feet and 56 KHz up to 25 feet indoor.
  • on axis, depending on remote strength and ambient.
  • interference.
  • Power: USB (A type)
IR CAT5e Extender 1.2KM (IE01T+IE01R/ 2 xIR emitter cable+2 IR receiver cable)
INPUTS:
IR
OUTPUTS:
IR
FEATURES:
  • Extend IR (infrared) control signal up to 1.2KM over one CAT5e/5e/6 cable.
  • IR receiver frequency range: 30Khz to 60Khz.
  • Supports up to 4 outputs.
  • Support Bi-directional application.
  • External power adapter requested either at transmitter or receiver unit.
  • Package include IR CAT5e Extender Kit, 1 x power adapter, 2 x IR emitter cable, 2 x IR receiver cable.
  • Option model: IR-CT01 IR emitter cable.