QUICK SEARCH

Additional files

IP01K(IP01+IP01H).Rev B8099.pdf
PDF DOWN LOAD
IP01K
4 port IP cameras over coax 200M (4 x IP01+ 1x IP01H 5 port Ethernet Switch Kit)

4 x IP01 IP extender + 1 x IP01H 5 Port Ethernet Switch Kit Package


Features:

IP01:
  • IP Extender over Coax.
  • Send IP camera signal over existing coaxial cable.
  • Passive, no power required.
  • Exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted signal.
  • Transmission up to 200 meters (Max).

IP01H:
  • 4 port IP cameras over coax 200M (4 x IP01+ 1x IP01H 5 port Ethernet Switch Kit)
Inquiry
IP01 is a low cost and easy, speedy solution to allow you use existing coax cable to send IP camera signal. Used in pairs with your RG59 cable to exceed the IEEE 802.3 10BaseT NEXT specification. The working range could up to 200 meters at 10Mbps speed.

IP01H 4 port Ethernet Switch is special design and built in 4 pieces IP01 (IP extender over coax) with BNC interface to send and extender TCP/IP signal over coaxial cable. Used in set with IP01 at IP camera side or any TCP/IP equipment, to send the IP signal up to 200 meters over your existing coax cable. 4 BNC port based on 10Mbps transmission speed, 1 port RJ45 to your NVR/computer based on 10/100Base-T.
ITEM NO.IP01
Video Input (BNC female Connector) 1
Connector BNC Female Connector to RJ45 Jack
Impedance 50Ω to dual 100Ω or 75Ω to dual 100Ω or 93Ω to dual 100Ω
Crosstalk > 30 dB
Cable Coax Cable (RG59)
Dimensions    W x H x D mm 69 × 25 × 22

ITEM NO.IP01H
Speed 10Base-T and 100Base-TX
Connector BNC x 4, RJ45 x 1
Power Supply DC5V 1A
Power Consumption 500mA
Storage Temperature -30℃~70℃
Operation Temperature -10℃~45℃
Dimensions    W x H x D mm 125 × 121 × 30
Weight g 400
Material g Metal Black