PoE Extender/ Repeater

• To send and extend TCP/IP signal over CAT5e/6 cable.

• Distance support:  500 meters at 100Mbps, 800 meters at 10Mbps

• Support 10BASE-T, 100BASE-TX, 100BASE-T1 standard.

• Support Auto MDI/MDI-X.

• Support Full duplex and half-duplex mode.

• Support EEE Energy-Efficient Ethernet.

• Built-in 1.5KV (Line to Line) surge protection.

• Long transmission distance up to 800M at 10Mbps.

• Full data transmission up to 500M at 100Mbps

• Provide 50W power to the device 200M away.

• Support Auto MDI/MDI-X.

• Compliant to 10BASE-T、100BASE-TX、100BASE-T1 standard.

• Compliant to 10BASE-T、100BASE-TX、100BASE-T1 standard.

• Support Full duplex and half duplex mode and Auto MDI/MDI-X switching

• Support EEE Energy-Efficient Ethernet.
• Built-in 30KV ESD protection, 40A EFT protection, 30A surge protection.

• To extend IP/POE camera over coax cable.
• Connects IP/POE camera to 10/100BaseT POE Injector/Switch over one coax cable.
• Support POE: IEEE 802.3af and IEEE802.3at
• Support 10/100 Mbps transmission rate.
• Power source from POE Injector/ POE Switch (order separately)
• IP01P Power Source Option Model: POE Injector/Switch: IP05I/IP05H/IP06H/IP06I

• Ability to send power over coax to IP/POE camera (DC5V, DC12).
• Support 10/100BASE-T transmission rate.
• Built in LED status indication.
• IP02P Power Source Option Model:

DC48V 40W power adapter: SWP480830

Power PoE Injector/ PoE Switch: IP05I, IP05H

• Extender 4 channel IP/POE signal over coax or CAT5e cable.
• Package includes IP02PH as transmitter connects to 4 port POE cameras and IP02D as receiver to connect with a network switch or NVR.
• Transmission distance: 2KM over coax cable, 1.2KM over CAT5e/6.
• IP02PH 4-Port 10/100Mbps with embedded PoE Injector.
• IP02PH 1-Port BNC/RJ45 10/100Mbps to send and extend IP/POE camera signal or any TCP/IP devices.
• Auto-sensing for detecting PoE or non-PoE devices.
• Compatible IEEE 802.3af PoE standard.
• IP02PH support external power supply DC48V-DC58V.

• Extend POE signal up to 600M, Ethernet or any TCP/IP devices up to 1000M.
• Ethernet and PoE data over coax or any two wire cables (UTP, telephone, bell, alarm, power cables.
• Support 10/100 Mbps transmission rate.
• Power source either from PoE Switch or external DC power adapter option. (order separately)
• Provides pass-through PoE up to IEEE802.3at 30W.
• Provides DC12V 1Amp power to camera.
• Support high power PoE to PTZ cameras at long distances.
• IP03P Power Source Option Model:

DC48V 40W power adapter: SWP480830

DC56V 70W power adapter: SWP561600

High Power PoE Injector/ PoE Switch: IP06I, IP06H

• Extend of both power and data beyond 100 meters.
• Allow to use multiple repeaters for longer range.
• No external power required.
• Compatible IEEE 802.3af POE standard.
• Auto-sensing for detecting PoE or non-PoE devices.
• Support 10/100/1000 BASE-T transmission rate.
• Built in LED status indication.
• Plug and play for easy installation.

• Extend of both power and data beyond 100 meters.
• Allow to use multiple repeaters for longer range.
• No external power required.
• Compatible IEEE 802.3at POE standard.
• Auto-sensing for detecting PoE or non-PoE devices.
• Support 10/100/1000 BASE-T transmission rate.
• Built in LED status indication.
• Perfect for long range outdoor POE camera use.
• Plug and play for easy installation.

• MOQ of 100 units required
• Extend of both power and data beyond 100 meters.
• Allow to use multiple repeaters for longer range.
• No external power required.
• Compatible with IEEE802.3af, IEEE802.3at,PoE+, LTPoE++
• Auto-sensing for detecting PoE or non-PoE devices.
• Support 10/100/1000 Mbps transmission rate.
• Built in LED status indication.
• Perfect for long range outdoor POE camera use.
• Plug and play for easy installation.
• Allow to connect external power adapter when IP04X90 power is insufficient for multiple POE repeaters or long cable length application.

• Ultra High Power 90W PoE Injector：IP06I90
• Ultra High Power 60W PoE Splitter：P06S60-12, IP06S60-24
• DC56V 90W power adapter：SWP561600

• To extend POE camera over coax cable.
• Works as a 8 Channel receiver in rack panel type at POE switch side .
• Work with IP01P-01 1 Channel POE extender at POE camera side.
• Connects POE camera to 10/100BaseT POE Injector/Switch over one coax cable.
• Support POE：IEEE 802.3af and IEEE802.3at
• Support 10/100 Mbps transmission rate.
• Power source from POE Injector/ POE Switch (order separately)
• Optional Mode：IP01P-01 1 Channel POE extender over coax.