QUICK SEARCH
6 products in this product line
VGA/HDMI Auto Swtich to HDBaseT Extender with IR/RS232/POE 70M
VHE02EIP
Inquiry
INPUTS:
VGA,HDMI
OUTPUTS:
HDMI
FEATURES:
  • To send and extend VGA/HDMI signal with IR/RS232/Power signal over one CAT5e cable.
  • Auto switch or manually setting for VGA and HDMI inputs.
  • VGA support stereo audio convert to HDMI output, resolution up to 1920x1200@60Hz.
  • Transmission range up to 70M by CAT5e/6 cable.
  • Uncompression video transmission, HDMI resolution up to 4K@30Hz.
  • Support Bi-directional IR with 30-60 KHz, RS232, PoH, and CEC.
  • Max. Data Rate- 10.2Gbps.
  • HDMI 1.4 and HDCP compliance.
  • Audio support up to LPCM7.1@192Khz, Dolby TrueHD, DTS-HD MA.
  • Support PoH (Power over HDBaseT), allow power send either from TX or RX unit.
  • Built in power isolation.
  • Transmitter unit include metal wall plate mounting brackets for easy installation at wall or on meeting table.
Wall Plate HDMI & IR Repeater CAT5e Extender over 2 CAT5e cable
HW01
Inquiry
INPUTS:
HDMI
OUTPUTS:
HDMI
FEATURES:
  • Extends HDMI and IR signal over two CAT5e/5e/6 cables.
  • Transmission range up to 60 meters.
  • Support high resolution up to 1080p.
  • Built in auto EQ function, no need to do any adjustment for different range.
  • Fully HDCP compliant.
  • HDMI 1.3a compatible, HDCP 1.1, support DDC, EDID, CEC, Hot Plug Detect
  • Built in IR repeater function, could be control the source devices from remote side.
  • Receiver unit power could be sending from PCB inside 5V terminal or external 5V DC Jack.
  • Package includes: transmitter and receiver unit, one external power adapter, IR emitter cable and IR receiver cable. ( 1.8 meters（6 ft）)
Wall Plate 1920 x 1200 VGA & Audio CAT5e Extender 70M
VW01HA
Inquiry
INPUTS:
VGA
OUTPUTS:
VGA
FEATURES:
  • Active type, including VW01HAT transmitter and VW01HAR receiver.
  • Built in stereo audio.
  • Audio by digital encoding process for sound undistorted.
  • Supports high resolution up to 1920 x 1200 at 70 meters.
  • Use 4 pairs CAT5e UTP cable instead of VGA cable.
  • External power required at transmitter unit, no power requested at receiver unit.
  • Wall Plate outer dimension: 70 x 115.
  • Compatible with metal box type VE01HA.
Passive Wall Plate (US type: 115 x 71mm) VGA CAT5e Extender
VW01
Inquiry
INPUTS:
VGA
OUTPUTS:
VGA
FEATURES:
  • Used in pairs via one CAT5e UTP cable to send VGA up to 100 meters.
  • VGA connector to shielding RJ45 female.
  • Wall plate outer dimension: 115 x 71 mm
  • Passive device, no power required, not support VGA DDC protocol.
  • Supports up to 1280x1024 pixels.
  • Up to 135 meters via standard 4 pairs CAT5e STP or UTP cable instead of VGA cable.
  • Transmitter built in virtual DDC to avoid improperly setting at resolution and frequency.
  • Transmitter built in sync mode selection for signal stability.
  • Receiver built in sync filter level adjustment for signal stability.
  • Perfect for classrooms, lecture halls, tradeshows, video information displays…etc.
Wall Plate HDMI & IR Repeater CAT5e Extender over 2 CAT5e cable
HW02
Inquiry
INPUTS:
HDMI
OUTPUTS:
HDMI
FEATURES:
  • Extends HDMI and IR signal over two CAT5e/5e/6 cables.
  • Transmission range up to 60 meters.
  • Support high resolution up to 1080p.
  • Built in auto EQ function, no need to do any adjustment for different range.
  • Fully HDCP compliant.
  • HDMI 1.3a compatible, HDCP 1.1, support DDC, EDID, CEC, Hot Plug Detect
  • Built in IR repeater function, could be control the source devices from remote side.
  • Receiver unit power could be sending from PCB inside 5V terminal or external 5V DC Jack.
  • Package includes: transmitter and receiver unit, one external power adapter, IR emitter cable and IR receiver cable. ( 1.8 meters（6 ft）)
Passive Wall Plate (EUROPE type: 86 x 86mm) VGA CAT5e Extender
VW02
Inquiry
INPUTS:
VGA
OUTPUTS:
VGA
FEATURES:
  • Used in pairs via one CAT5e UTP cable to send VGA up to 100 meters.
  • VGA connector to shielding RJ45 female.
  • Wall plate outer dimension: 86 x 86 mm
  • Passive device, no power required, not support VGA DDC protocol.
  • Supports up to 1280x1024 pixels.
  • Up to 135 meters via standard 4 pairs CAT5e STP or UTP cable instead of VGA cable.
  • Transmitter built in virtual DDC to avoid improperly setting at resolution and frequency.
  • Transmitter built in sync mode selection for signal stability.
  • Receiver built in sync filter level adjustment for signal stability.
  • Perfect for classrooms, lecture halls, tradeshows, video information displays…etc.