QUICK SEARCH
7 products in this product line
TTA414VPDR 4 Port HD-TVI/AHD/HDCVI/CVBS Video, DC12V Regulated Power, Data Receiver
INPUTS:
HD-TVI,AHD,HDCVI
OUTPUTS:
HD-TVI,AHD,HDCVI
FEATURES:
  • Use with TTP111VPDC video, power, data transmitter at camera side to send 4 port video and power, data from remote side over one UTP CAT5e cable.
  • Video Support: HD-TVI/AHD/HDCVI/Composite.
  • RJ45 termination for easy installation.
  • Power input: AC100-AC240V.
  • Transmission range up to 300 meters.
  • Built in LED indication.
  • Built in ESD and surge protection.
  • Provide high power to 4 remote cameras DC12V/100W (Max.)
  • Built in fan for low operating temperature.
TTP111VPDC HD-TVI/AHD/HDCVI/CVBS Video, DC12V Regulated Power, Data Tansmitter
INPUTS:
HD-TVI,AHD,HDCVI
OUTPUTS:
HD-TVI,AHD,HDCVI
FEATURES:
  • To send video and remote power over one UTP CAT5e cable.
  • Video Support: HD-TVI/AHD/HDCVI/Composite.
  • Built in RS485 terminal for data transmission.
  • Built in power detection with power output DC12V regulated 1.5Amp at 300 meters.
  • Built in fan for low operating temperature.
  • Transmission distance up to 300 meters.
  • Built in LED indication.
  • Built in ESD and surge protection.
  • For DC12V camera use, the power sources from remote UTP receiver: TTA111VPDR, TTA414VPDR for professional CCTV Industry Installation.
TTA111VPDR 1 Port HD-TVI/AHD/HDCVI/CVBS Video, DC12V Regulated Power, Data Receiver
INPUTS:
HD-TVI,AHD,HDCVI
OUTPUTS:
HD-TVI,AHD,HDCVI
FEATURES:
  • Use with TTP111VPDC video, power, data transmitter at camera side to send video and power, data from remote side over one UTP CAT5e cable.
  • Video Support: HD-TVI/AHD/HDCVI/Composite.
  • RJ45 termination for easy installation.
  • Provide high power to remote camera DC12V/25W (Max.)
  • Power input: AC100-AC240V.
  • Transmission range up to 300 meters.
  • Built in LED indication.
  • Built in ESD and surge protection.
TDP016 16Port Cable Integrator(Video, Power, Data) in U Rack
INPUTS:
CVBS
OUTPUTS:
CVBS
FEATURES:
  • 16 x RJ45 connector for video input + power output + data output.
  • 4 x RJ45 connector for video output, 4 x 8 pin terminal for power input, 1 x 2 pin terminal for data input.
  • Built in surge protection on data signal.
  • 16 cameras cable termination panel, use for integrating power, video and data signals onto 4 x RJ45 4 pairs UTP cable.
  • Individual power input, could send different power voltage based on camera power consumption and transmission range.
  • Use with TTP111VPD-RJ45 video, power, data transceiver at the camera side.
  • Use any third-party power supply to power cameras via UTP over (See below “power distance chart”).
  • Use with TTP016-RJ45 as video transceiver receiver at control room.
  • Perfect cable management solution from the camera to the wiring station, control room.
TPP016VPD 16 Port HD-TVI/AHD/HDCVI/CVBS Video, AC24V Power, Data Hub in 1 U Rack
INPUTS:
HD-TVI,AHD,HDCVI
HD-TVI,AHD,HDCVI
FEATURES:
  • TPP016VPD CCTV hub Integrate and send video and power, data over a single 4 pairs CAT5e cable up to 300 meters.
  • Built in switch at each port to set unit for “2 pair power + 1 pair data” mode or “ 3 pairs power” mode.
  • Power cameras via 2 or 3 pairs UTP cable for variety distances (please refer to below power distance chart).
  • Use with video power transceiver TTP111VP3 (AC24V camera), TTP111VC (DC12V camera) at camera side, to send video and power only.
  • Use with TTP111VPD-RJ45 video, power, data combiner at the camera side, to send video, power and data.
  • 10 Amp AC24V power, each port output current up to 1.1Amp for camera, max up to 10Amp.
  • Built in “no fuse breaker” to avoid current overload.
  • Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
  • Perfect cable management solution from the camera to the wiring station, control room.
CA101HDP HD-TVI/AHD/HDCVI Video & Power over one Coaxial Cable
INPUTS:
HD-TVI,AHD,HDCVI
HD-TVI,AHD,HDCVI
FEATURES:
  • To send HD video and camera power over one coaxial cable.
  • Transmission distance: up to 300M for TVI and up to 400M for AHD/CVI/CVBS.
  • Support power input: DC 24V – DC40V .
  • Support camera power output: DC12V.
  • Package included one DC40V power adapter selection.
CA101HDP-DC40 HD-TVI/AHD/HDCVI Video & Power over one Coaxial Cable 400M
INPUTS:
HD-TVI,AHD,HDCVI
OUTPUTS:
HD-TVI,AHD,HDCVI
FEATURES:
  • To send HD video and camera power over one coaxial cable.
  • Transmission distance: up to 300M for TVI and up to 400M for AHD/CVI/CVBS.
  • Support power input: DC 24V – DC40V
  • Support camera power output: DC12V
  • Package included one DC40V power adapter selection.