Twisted Pair Video Ground Loop Isolator
Product ID: TGP001
Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, differences in ground potentials are typically caused by unbalanced power line loads.
Specifications:
- Insertion Loss: 0.5dB
- Frequency Response: 0-3dB at 10Mhz
- Isolation Voltage: 600VDC (Min)
- Input Resistance: 75 ohm
- Output Resistance: 75 ohm
- Insulation Resistance: 100m Ohm
- Transient Voltage Suppressors: 12 Vrms
- Dimension: 69x25x22
Features:
- BNC male to 2 pin terminal block.
- Passive, no power required.
- Prevents video-signal distortion caused by video ground loops.
- Eliminates picture tearing, cross talk and rolling.
- Prevents power cables laid by others interfering with the CCTV system.
- Built in TVS (Transient Voltage Suppressors) for surge protection.