RS232 TO RS485 CONVERTER

Products

RS232 TO RS485/RS422 CONVERTER

RS232 Input: J11/12 Connector or DB9.
- RS485/422 Output: Terminal or RJ11/12 Connector
Signal Output: 2-wire half-duplex RS485 or 4-wire full-duplex RS485/RS422)
- LEDS: Power(RED), TX-485(GRN), TX-RS232(GRN),RX-RS232(GRN),DTS(GRN),RTS(GRN)
Transmission Range: 1200 meter (4000 ft)
- Storage TEMP.:-30�J~70�J
- Operation TEMP.:-10�J~45�J
Data Rate:Up to 115.2Kbps
Power Consumption: DC5V 300mA
- Power Supply: DC5V 300mA Regulated
- DIMENSIONS W x H x D mm: 53x33x17

RS232 Input option: DB9 or RJ11.
- RS485/RS422 output option: terminal or RJ11.
RS232 to RS485 or RS232 to RS422 conversion
- Four full Duplex wires; two half duplex wires.
Switch setting for full duplex or half duplex operation.
Auto Baud Rate Sensing.
- Supports transfer speeds of up to 115.2Kbps.
- Extends up to 1200 meters (under 100Kbps).
�܃� Support up to 32 units to be set in RS-485 multi drop installations.
LEDS indications for power and signal status monitoring.
- Over current protection when 2 signals are shortened together at the RS422/485 end
Surge Protection 16KV ESD.
- Built in termination resistors

Address:	10F, No.493, Chung-Cheng Rd., Hsin Tien City Taipei County, 231 Taiwan
TEL:	886-2-22186886 (Rep.)
FAX:	886-2-22187989
Email:	service@sct.com.tw smart.cabling@msa.hinet.net
URL:	http://www.sct.com.tw
ZIP:	235