- Home
- About Us
- Products
- HD-TVI / AHD / HDCVI / CVBS Transmission [4]
- Balun / Extender [24]
- Video & Power Solution [6]
- Amplifier / Distributor [10]
- Analog Video CCTV Twisted Pair Transmission [2]
- IP / PoC / PoE Transmission [3]
- HDMI, DVI, VGA Matrix over IP Transmission [2]
- HDMI Transmission [9]
- HDMI COAX / Fiber Optic Extender [5]
- HDMI CATx Extender [10]
- HDMI CATx Extender Distribution [4]
- 4K HDBaseT (HDMI) CATx Extender [7]
- 4K 60Hz HDBaseT (HDMI) CATx Extender [4]
- HDMI Distribution Amplifier / Switcher [7]
- HDMI Multiviewer / Seamless Switcher [2]
- HDMI / HDBaseT Matrix [10]
- HDMI Tools [10]
- DisplayPort / DVI Transmission [2]
- VGA Transmission [4]
- 3G / HD-SDI Transmission [3]
- Surge Protector [19]
- Converter [2]
- Audio Transmission [8]
- Speaker Selector Matrix with Volume Control [10]
- Home Audio Bluetooth Digital Amplifier & Control System [4]
- Wall Plate CATx Extender [8]
- IR (Infrared) Transmission [7]
- Composite Video / Component VideoTransmission [4]
- Data Transmission [3]
- Solution Provider for Video Interference [3]
- Power Converter / Power Center [4]
- Cable / Tools & Accessories / Connectors [3]
- Rotary Switch [8]
- HD-TVI / AHD / HDCVI / CVBS Transmission [4]
- Solutions
- News and Press Release
- FAQ
- Contact Us
Product
CF-PW150-4
Product ID: CF-PW150-4
150W 4 Pair Speaker Selector
Specifications:
CF-PW150-4 operation method is very easy. First all, it can input A or B AMPLIFIER, 4 independent sets of A or B switch selection, and pressing down A/B switch selection as B AMPLIFIER, and pressing up A/B switch selection as A AMPLIFIER at the same time. Moreover, 4 sets of ON/OFF function selection are independent, pressing down as ON and pressing up as OFF. Please remember that CF-PW150-4 is an automatic impedance compatible design. Therefore, it should be correctly input, no matter what kind of combination is.
Features:
(1). Autoformer impedance compatible design as high quality sound effect.
(2). Low electric power consumption, not easy generating heat.
(3). High electric power uses 50W/channel (RMS) total of 300W and 150W/channel (Music Power).
(4). 4Ω and 8Ω can be used for speaker systems.
(5). Advanced connector can load 16-22 AWG capacity of speaker cable.
|
Hot Products











